Empire Gravity Wall Furnace MV 25000 BTU GWT25W Review

Are you looking for total heating comfort for a fraction of the cost of electric heat? Our economical Empire Gravity Wall Furnace MV 25000 BTU GWT25W is here. Avail this one now here at Flame Authority, your Trusted Dealer!

According to the US Environmental Protection Agency, heating with any gas appliance generates far less particulate pollution compared to heating with any other common fuel. The worst polluter, a wood fireplace, generates 28 pounds of particulates (measuring 2.5 microns or more) for every million Btu of fuel input. Heating with gas generates a tiny fraction of that (just 0.0083 pounds) for every million Btu input. Compared to an EPA-certified wood stove, gas heat still generates less than 1 percent of the particulate pollution. And gas produces less than 2 percent of the
pollution emitted by a pellet stove. The Gravity Wall Furnace features in-shot burners that light instantly and burn cleanly and quietly.

Note:

Due to high temperatures, the appliance should be located out of traffic and away from furniture and
draperies.
Children and adults should be alerted to the hazard of high surface temperatures and should be kept away
to avoid burns or clothing ignition.
Installation and repair should be done by a qualified service person.

Buy Empire Gravity Wall Furnace MV 25000 BTU GWT25W today. Available here at Flame Authority, your Trusted Dealer!

Features

Features:

State-of-the-Art Technology for Better Fuel Efficiency
Thermostat not included
Common Size Retrofits Easily
GWT25W/35W Furnace Recesses into Wall or Mounts Flush with Optional GWTW2
Total Comfort for a Fraction of the Cost of Electric Heat
Optional Blower Available
Made in the USA
Units do not come with thermostats
One blower may be purchased for each side.
When the GWTW2W Out-of-the-Wall kit is used, the GWTR1W Rear Register kit cannot be used.

Manuals

Manuals:

Need assistance? Talk to an Expert at 1-800-923-4556 or email: [email protected] to get the best-suited Wall Furnaces for your needs.

Specifications

Specifications:

Color Cabinet and Front Panels: White
Btu Input: 25,000
Width: 16”
Depth: 6”
Height: 66 1/8”
Height with Optional Blower Kit: 71 7/8”
Shipping Weight, lb.: 86
Control Options: (Not Included)
Works with Manual; Toggle Switch; Thermostat;
Wall Switch; or Remote Control: Yes
Minimum Clearances to Combustibles From Top: 12”
Minimum Clearances to Combustibles From Each Side: 4”
Bottom of Unit to Floor Covering: 1 1/2”
Type of Gas (State on Order): Natural Gas/Propane
Iron Pipe Size (N.P.T.): 1/2”
Safety Controls: Pilot and Main Burners Include Automatic Shut-off

Options and Accessories

Options and Accessories:

TRW Wireless Remote Wall Thermostat

This convenient wall thermostat puts you in control, allowing you to adjust your gas log settings from an easily accessible wall switch. Empire Comfort Systems makes your life simple with the added luxury of fireplace accessories that improve the quality of your gas log experience.

TDV1 Temperature Wall Thermostat-Digital

Features:

Type: Digital Wire Wall Thermostat
Weight: 1.00 lbs

TMV Wall Thermostat-Reed Switch

Features:

Type: Wall Thermostat - Reed Switch
Weight: 1.00 lbs

GWRBT Remote Bulb Thermostat for B-Vent Gravity Wall Furnace

Thermostats are a great addition to any heater or furnace. The thermostat allows you to accurately monitor the heat output of your heating appliance, then adjust it more precisely to fit the needs of your home or space. This model is designed exclusively for Empire gravity-vented wall furnaces.

Features:

Model: GWRBT
Type: Thermostat
Remote Bulb Millivolt Thermostat
For Use With GWT-25, GWT-35, and GWT-50

GWTB2W Automatic Blower for B-Vent Gravity Wall Furnace

The Empire GWTB2 Automatic Gas Furnace Blower - For Gravity-Vented Wall Furnaces increases the efficiency of a heater. This model is designed specifically for the model the heater listed. Blowers take the air warmed by the heater and help circulate it around the room more efficiently, increasing the effectiveness and range of the heater.

Features:

Model: GWTB2W
Type: Blower
Finish: Powder Coated

Automatic gas furnace blower
Improves air circulation and distribution
Fits all of Empire's Gravity-Vented Wall Furnaces

GWTR1W Rear Register Kit for B-Vent Gravity Wall Furnace

The use of a rear register on your gravity vented furnace will allow you to heat a rear adjoining room with a single heater. In order to use the rear register for heating an adjacent room, the heater must be recessed into a wall.
It is for use with Empire GWT-25W and GWT-35W Gravity Vented Wall Furnaces. It is in white to match your furnace.

Features:

Model: GWTR1W
Type: Register Kit
Empire Gravity Wall Furnace MV 25000 BTU GWT25W

FuelType:
NaturalGas

LiquidPropane

$ 60.06

$ 46.20

Please select combo product attributes

The combo subtotal is $,SAVE$

Unavailable